| Usage: | Radar, Sallite Telecommunication |
|---|---|
| Type: | Wired |
| Information content: | Data |
| Condition: | New |
| Frequency: | 2300-2400MHz |
| Output Power: | 25W |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | No. | Item | Specification | ||
| Tx1 | Rx1, Rx2 | |||
| 1 | Frequency Range | 703-803M, or 2300-2400MHz, or Customized | ||
| 2 | TDD working Mode | When Tx is ON, Rx is OFF; When Tx is OFF,Rx is ON | ||
| 3 | Max Gain | >46dB | >20dB | |
| 4 | Noise Figure | / | <2.5dB | |
| 5 | MAX Out Power | Model 1 | 43dBm (IMD:45dBC or ACPR: 32dBC) | / |
| Model 2 | 34dBm (IMD: 50dBC or ACPR: 40dBC) | |||
| 6 | Input Power | 0 to 5dBm | / | |
| 7 | Damage Input Power | 15dBm | / | |
| 8 | Gain Adjust Range | 31dB | / | |
| 9 | Gain Adjust Step | 1dB | / | |
| 11 | Tx-Rx Switch Time | 2us | ||
| 12 | External Tx-Rx RF Switch Trigger Voltage |
1.8-3.3V: Tx ON, Rx OFF | ||
| <1V: Tx OFF, Rx ON | ||||
| 14 | Model Switch Time | 5us | ||
| 15 | Model Switch Voltage | 5V: Model 1 ; 0V : Model 2 | ||
| 16 | In Out VSWR | 1.5 | ||
| 17 | Working Voltage | 27VDC | ||
| 18 | Working Current | <8A(Model1), 3A(Model2) | ||
| 19 | RF Input/ Output Ports | N-Connector | ||
| 20 | Dimension | About 200x160x25mm | ||
| 21 | Power Supply Interface | Pull-core Capacitance | ||
| 22 | Protection | Shut-down over High VSWR and auto-restart after 30second Shut-down over higher than 75ºC, and auto-restart lower than 50ºC |
||
| 23 | I/O Port DB9 Male |
PIN1,PIN2: RS485+ | ||
| PIN3,PIN4: RS485- | ||||
| PIN5: GND | ||||
| PIN6: External Tx/RxTrigger | ||||
| PIN7: Mode1 / Mode2 Trigger | ||||
| 24 | RS485 | RS485 (With free PC software) | ||
| Setting: ON/OFF, ATT, Gain, Alarm Temperature, Alarm VSWR; Monitoring: RF Power, VSWR, Temperature, ATT, Gain, Alarms |
||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}