1150-1280MHz 53dBm 200W RF Power Amplifier

• Customization: Available
• Use: Equipment
• Screen Size: No Screen
• Model NO.: HPA-W53(1150-1280MHz)
• Warranty: 2 Years
• Chip: GaN
• Weight: 1.5kg
• Packing Size: 250X180*50mm
• Material: Copper Aluminium
• Technology: Alc
• Tech: Temperature Compensation
• Temperature: -25 to +75 Celsius Degree
• Transport Package: Carton
• Specification: 200x140x25mm
• Trademark: OEM
• Origin: Shenzhen
• HS Code: 8517799000
• Production Capacity: 600/Months

Product Description

Main Specification
 

No.	Item		Description
1	Frequency Range		1150-1280MHz,  1550-1620MHz or Customized
2	Pout		>53dBm
3	Pin range		0dBm
4	Gain		>53dB±1dB
5	RF Port VSWR		≤1.5, 50 Ohms
6	Working Voltage		<16A @28VDC±1V
7	RF Input Port		SMA-Female
8	RF Output Port		N-Female or SMA-Female
9	Spurious		>60dBc
10	Dimension	Type A	180*155*25mm (Exclusive Connector)
		Type B	155*150*25mm (Exclusive Connector)
11	Power Supply Port		DSUB
12	Working Temperature		-25----+65ºC
13	Protection		Shutdown more than 75ºC, auto-restart less than 50ºC
			Shutdown over High-VSWR
14	I/O	Parallel	TTL, DB15 Female
		Serial	RS485

I/O Port (Default): Parallel DB15 Female

DB15 Female	Description	IN/Out(D/A)
PIN6	Preset (When protection occurs,  input a pulse signal to reset PA)	IN, Data
PIN7	Pr (reversed RF Power, 0-5V)	Out, analog
PIN10	Pf (Forward RF Power, 0-5V)	Out, analog
PIN11	EN (5V: PA OFF; Hang in air or grounding: PA ON)	IN, data
PIN12	TA (Temperature alarm, Alarm: 5V, Normal: 0V)	Out, data
PIN13	VA (VSWR Alarm, Alarm: 5V, Normal: 0V)	Out, data
PIN14	Tc (Temperature:0.01V/1ºC,  0.75V @25 ºC )	Out, analog
PIN15	GND	GND

Feature:

1. Pout is stable over -20~65ºC
2. Efficiency is more than 30% for 200W
3. Over-high VSWR to avoid or reduce the damage from any mismatch
4. Over-high temperature protection, Shutdown more than 75ºC, auto-restart less than 50ºC
5. DB15 serial port is standard, DB9 Parallel RS485 is optional(China Mobile Protocol)
6. Remark
7. PA should be operating on an appropriate radiator, otherwise it will shut down by over high-temperature.
8. Pout port cannot open or short, otherwise may burn and damage PA.
9. Pout port should should be connect to a probably Load, Attenuator or antenna (50 ohms, more than 100W handling Power, lower than VSWR 2.0). 
10. The power supply range and polarity of power supply must be correct, otherwise will damage the PA.
11. Pout probably lower than the rated power when input Power less than 5dBm; PA probably is damaged if Pin is higher than 12dBm