Customization: | Available |
---|---|
Usage: | Radar, Sallite Telecommunication |
Type: | Wired |
Still deciding? Get samples of US$ 1000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item | Requirements | |
Frequency Range | 728-768 /791-821 /869 -894 /925-960 /1805 -1880 /1930-1990 /2110-2170 /2620-2690 MHz | |
Gain(Small Signal) | ≥50dB± 3dB | |
In-Band Ripple | ≤2dB | |
Input Signal Range | 5-15dBm | |
RF Input Signal | CW | |
RF Output Power | ≥53dBm | |
Gain Adjust Range | 0-31dB, 1dB Step | |
Input/Output VSWR | ≤1.5 | |
Working Voltage | 28VDC | |
Working Current | ≤22A(Full Power) | |
RF Input Port | 50 Ohms SMA-Female | |
RF Output Port | 50 Ohms N--Female | |
Power Supply Interface | 2W2-Male or | |
Dimension | About 180x150x25mm ( Exclusive Connector) | |
Working Temperature | -25 to 65ºC | |
I/o Port | RS485 (DB9-M) (Option) |
RS485 (With free PC software) |
Setting: ON/OFF, ATT, Gain, Alarm Temperature, Alarm VSWR; | ||
Monitoring: RF Power, VSWR, Temperature, ATT, Gain, Alarms | ||
PIN1,PIN2: RS485A; PIN3,PIN4: RS485B | ||
Parallel (DB15-F) |
PIN1:2dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | |
PIN2:2dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
PIN3:4dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
PIN4: 8dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
PIN5:16dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
PIN7: V/L (Reflected RF Power, Max voltage,3.3V; 0.1V/1dBm @25ºC ) | ||
PIN10:P/L (Output RF Power; Max voltage,3.3V; 0.1V/1dBm @25ºC) | ||
PIN11: LE : High Level(5V) or hang in air:: OFF; Low Level(0V) ON | ||
PIN12: Alarm over High-Temperature(80+/-2ºC) and shutdown, Auto Restart @ 55ºC+/-2ºC | ||
PIN13: Alarm over High-VSWR, Auto-restart after 30s. | ||
PIN14: T/L Temperature Monitor = 0.01*Tc(ºC)+0.5 (V) (Tc=Case temperature) | ||
PIN15: GND |